Encore electronic ENHWI-G2 User Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 51
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
RTS
Threshold
If the packet size is smaller the RTS threshold, the
wireless router will not send this packet by using the
RTS/CTS mechanism.
Beacon
Interval
The period of time how long a beacon is
broadcasted.
Data Rate
The "Data Rate" is the data packets limitation this
wireless router can transmit. The wireless router will
use the highest possible selected transmission rate
to transmit the data packets.
Preamble
Type
It defines the length of CRC block in the frames
during the wireless communication. "Short
Preamble" is suitable for heavy traffic wireless
network. "Long Preamble" provides much
communication reliability
Broadcast
SSID
If you enable "Broadcast SSID", every wireless
station located within the coverage of this wireless
router can discover this wireless router easily. If you
are building a public wireless network, enabling this
feature is recommended. Disabling "Broadcast
SSID" can provide better security.
IAPP
To enables multiple AP to communicate and pass
information regarding the location of associated
Stations.
802.11g
Protection
Some 802.11g wireless adapters support 802.11g
protection, which allows the adapters searches for
802.11g singles only. Select the “Disabled” to
disable supporting 802.11g protection or select
“enable” to support this function.
RF Output
power
Select the RF (Radio Frequency) power. The RF
output power has positive correlation with signal
strength.
Turbo Mode
Some of our wireless adapters supports turbo
mode, which provides a better connection quality.
Select “Always” to support turbo mode or select “off”
to turn it off . Select “Auto” turns it on or off
automatically.
20
Click the <Apply Changes> button at the bottom of the screen to save the above configurations.
You can now configure other advance sections or start using the router.
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 50 51

Comments to this Manuals

No comments