Encore electronic ENHWI-G2 User Manual download pdf (Page 33)

PPPoE Mode

User Name, password

and service name

Fill in the User Name, password and service name that

provided by your ISP.

Connection Type “Continuous” is for Always keep connection

“Connect on demand” is for bill by connection time.

You can set up the Idle time for the value specifies the

number of time that elapses before the system

automatically disconnects the PPPoE session.

“Manual” To connect to ISP, click “Connect” manually

from the WEB user interface. The WAN connection will

not disconnected due to the idle timeout. If the WAN

line breaks down and latter links again, the router will

not auto-connect to the ISP.

Idle Time:

The value specifies the number of idle time

that elapses before the system automatically

disconnects the PPPoE session.

MTU Size To Enable the Maximum Transmission Unit of Router

setup. Any packet over this number will be chopped up

into suitable size before sending. Larger number will

enhance the transmission performance.

Enter your MTU number in the text-box to set the

limitation.

Attain DNS automatically:

If your DNS provide by ISP is dynamic, choose

“Attain DNS automatically

Set DNS Manually To specify the DNS, and enter the DNS provided by

your ISP in DNS 1 2 3.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 50 51

No comments

Encore electronic ENHWI-G2 User Manual Page 33