Encore electronic ENHWI-G2 User Manual download pdf (Page 22)

Wireless

Wireless Access Point builds a wireless LAN and can let all PCs equipped with

IEEE802.11b/g wireless network adaptor connect to your Intranet. It supports

WEP encryption and MAC address filter to enhance the security of your wireless

network.

Basic Settings

You can set up the configuration of your Wireless and monitor the

Wireless Clients associate with your AP.

Configuration

Disable Wireless LAN

Interface

To Disable interface of Wireless LAN

Band

To select a band for this device to match 802.11b,

802.11g or both.

Mode

Configure this device as AP, WDS or both.

SSID The name of the wireless network

Country Select the region you live.

Associated Clients Click "Show Active Clients" button, then an "Active

Wireless Client Table" will pop up. You can see the

status of all active wireless stations that are connecting

to the access point.

Enable Universal

Repeater Mode

Mark this checkbox to enable Universal Repeater Mode

which acts this device as an AP and client

simultaneously.

SSID of Extended

Interface

While you enable the Universal Repeater Mode, you

have to specify an SSID for the extended interface.

Click <Apply changes> button at the bottom of the screen to save the

above configurations. You can now configure other advance sections or

start using the router (with the advance settings in place)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 50 51

No comments

Encore electronic ENHWI-G2 User Manual Page 22